Doro PhoneEasy 311C Mode D'emploi page 4

Masquer les pouces Voir aussi pour PhoneEasy 311C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

This device is intended for the analogue telephone network lines in AT,
BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS,
IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SI, SK, SE.
Connection
1. Connect the handset curly cord to the handset and the socket on the
left-hand side of the telephone.
2. Connect the telephone line cord to the socket at the rear of the
telephone, and to a telephone network wall socket.
3. You will hear a click when the modular plug is correctly in place.
4. Lift the handset and listen for the dial tone. Your telephone is now
operational.
Wall mounting
The telephone can be wall mounted using two screws positioned
vertically at a distance of 100 mm, the screws should fit into the 'keyholes'
on the back of the telephone. Remove the hanger hook (please refer to
diagram on page 2) by pushing it upwards, then rotate it 180 degrees and
replace it.
Hearing Aid compatible
This telephone is hearing aid compatible. Select the T mode on your
hearing aid to enable this feature.
Mute button
Press and release
light next to the button will flash while the microphone is muted. Press
and release
again to continue with your telephone conversation.
z
Redial button
If the number dialled is engaged or you wish to dial the last number
called lift the handset and press and release
the number dialled was from memory (i.e. M1, M2, M3 or 0-9).
Memory
The telephone has 3 one-touch and 10 two-touch memories. One-touch
memories are stored in M1, M2 & M3, two touch memories are stored
using the telephone keypad digits 0-9.
English
to mute the handset microphone during a call, the
z
. Redial will not work if
r
1

Publicité

Table des Matières
loading

Table des Matières