Certificate Of Compliance - thuba SAnR Manuel

Masquer les pouces Voir aussi pour SAnR:
Table des Matières

Publicité

Manual Access Point SAnR/SAtc
Issued to
Address
Project Number
Product
Model Number
Ratings/Markings
Applicable Standards
Factory/Manufacturing Location
Statement of Compliance: The product(s) identified in this Certificate and described in the Report covered under the above
referenced project number have been investigated and found to be in compliance with the relevant requirements of the above
referenced standard(s). As such, they are eligible to bear the QPS Certification Mark shown below, in accordance with the provisions
of QPS's Service Agreement.
Issued By: Dave Adams, P. Eng.
Manager, Hazardous Locations [Ex Equipment] Department
Signature:
81 Kelfield St., Units 7-10, Toronto, ON M9W 5A3 Tel: 416-241-8857; Fax: 416-241-0682
QSD 34HL
Edition June 2021
Copyright
QPS Evaluation Services Inc
Testing, Certification and Field Evaluation Body
Accredited in Canada, the USA, and Internationally

CERTIFICATE OF COMPLIANCE

(ISO TYPE 3 CERTIFICATION SYSTEM)
Thuba Ltd.
Stockbrunnerain 9
4123 Allschwill
Switzerland
LR1702-1
Restricted Breathing Enclosure
Acess Point SAnR
Rated: 100-240 VAC; 50/60 Hz; 1.9-1.1 A, see Annex for Conditions of acceptability
Tamb 0˚C to +60˚C
Ex nR IIC T6 Gc
Ex tc IIIC T90 C Dc
Class I, Zone 2, AEx nR IIC T6 Gc
Zone 22, AEx tc IIIC T90 C Dc
Class I, Div. 2, Groups A, B, C and D T6 and Class II, Div.2, Groups F, G.
IP66
CSA C22.2 No. 60079-0:19
CSA C22.2 No. 60079-31:15
CSA C22.2 No. 60079-15:18
CSA C22.2 No. 213:17
CSA C22.2 No. 61010-1-12; UPD1: 2015, UPD2: 2016, AMD1: 18
UL 60079-0 7th ed.
UL 60079-31 2nd ed.
UL No 60079-15 5th ed.
UL 121201 9
ANSI/ISA-61010-1 3rd Edition ; AMD1 :18
Same as Applicant
www.qps.ca
th
ed.
Page 1 of 2
File
LR1702
Date: July 9, 2021
Rev 00
thuba Ltd., CH-4002 Basel
Switzerland
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Satc

Table des Matières