Unpacking Your Fan - Hinkley HIGHLAND 60 Mode D'emploi

UNPACKING YOUR FAN

UNPACK YOUR FAN AND CHECK THE CONTENTS.
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all
parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
1
9
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
04 | hinkley.com
6
2
7
3
4
8
5
GLADIATOR ILLUMINATED PACKAGE CONTENT
1 Blade Set of 5
2 Blade Arm Set of 5
3 Hanging Bracket
4 Ceiling Canopy and Trim Ring
5 Downrod/Ball Assembly
6 Yoke Cover
Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
7
included on your fan.
Save screws
Detachable Switch Housing
8
w/Controller
Hardware Bag
9
Pull Chain with Fob,
Bracket Mounting Hardware
(wood screws, screws, lock
washers, washers, wire nuts),
Blade to Blade Arm Screws and
Fiber Wshers,
Balance Kit,
Safety cable hardware
(wood screw, flat washer)
XX=FAN FINISH
BL904160Fxx
BLI904160Fxx
CA902672Fxx
DR94014Fxx
YC900460Fxx
x
SWH904160Fxx
MH904160Fxx