Operación; Important - Hinkley HIGHLAND 60 Mode D'emploi

OPERACIÓN
Encienda la alimentación y verifique el funcionamiento del ventilador. El ventilador se controla mediante el uso de la cadena de tracción de la siguiente manera
1
un tirón = alta velocidad
dos tirones = velocidad media
tres tirones = baja velocidad
cuatro tirones = o ff
For proper functions, ensure that the chain is pulled down fully and released each time.
2
NOTE: Leave pull chain switch in "high speed" position when using optional controls.
The slide switch on the side of the switch housing controls forward or reverse rotation. Make sure switch is not stuck between
3
forward and reverse positions.
IMPORTANT: To prevent damage or cause injury, be sure that fan is switched to off and blades have stopped moving completely
4
before attempting to change direction of rotation.
Summer Mode and Winter Mode Operation:
The reverse switch is located on the surface of the switch housing. Slide the switch to the right for winter mode operation. Slide the
5
switch to the left for summer mode operation.
Summer Mode (forward):
6
A DOWNWARD airflow creates a cooling effect as shown in Figure 1. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
Winter Mode (Reverse):
7
An UPWARD airflow moves warmer air off the ceiling area as shown in Figure 2. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
MODO VERANO
Fig. 1
(SENTIDO ANTIHORARIO)
12 | hinkley.com
MODO INVIERNO
(SENTIDO DE LAS AGUJAS DEL RELOJ)
Fig. 2