Nuna trvl Mode D'emploi page 10

Canopy
1
- Slide the canopy mounts onto the stroller.
2
- A "click" sound means the canopy is assembled
completely.
3
- Snap the buttons on the back panel of canopy to the
backrest.
Armbar
It is always recommended that the armbar be used, but it
is not a restraint device. Always secure the child with the
harness.
4
- Align the armbar ends with the armbar mounts, and
insert until it clicks into place. A "click" sound means the
armbar is assembled completely.
5
- To rotate the armbar, press the armbar release button on
one side (1) and rotate the armbar from the other side (2).
6
- To remove the armbar, press the armbar release buttons
(1) and pull the armbar out (2).
Check Setup
Stroller frame is latched open
Rear and front wheels are securely attached
Armbar is securely attached
16 TRVL instructions
1
2
click
3
4
click
5
1
2
6
2
1
1
TRVL instructions
17