Roller's Fox ANC Instructions D'emploi page 10

eng
The ROLLER'S reciprocating saws with universal motor have carbon
brushes. These are subject to wear and must therefore be inspected
or replaced from time to time by an authorised ROLLER after-sales
service facility. See also section 5. Action in case of trouble.
Be sure to buy the right saw blade first time.
The right choice will save you expense and trouble.
ROLLER'S
special saw blade
Specially developed for ROLLER'S Fox ANC. Absolutely essential for right
angle sawing and for fast dismantling with power transmitting guide support.
This results in multiple sawing pressure through 5-fold power transmitting le-
verage effect. Normal saw blades with single tang do not withstand the high
feed pressure during sawing with guide support, they break at the mounting
point. For this reason, extra thick ROLLER'S special saw blade, resistant to
bending and distortion. Double tang mounting with exceptionally wide clam-
ping face ensures accurate seating and high stability. Coarse, corrugated
tooth pattern for rapid sawing. Long service life.
1. For ROLLER'S Fox ANC, ROLLER'S
Fox ANC VE, ROLLER'S Fox ANC SR,
and other brands.
2. For all ROLLER'S reciprocating saws
and other brands.
3. For all ROLLER'S reciprocating saws
and other brands.
2" / 4"
ROLLER'S special saw blade 2" / 4"
for right angle sawing and for fast dismantling with power transmitting guide support.
ROLLER'S special saw blade 2"
for steel pipes up to 2"
ROLLER'S special saw blade 4"
for steel pipes up to 4"
For hard-to-machine materials, e.g. stainless steel pipes, hard cast iron pipes, use the finer toothed
ROLLER'S special saw blade 150 / 200 / 300 instead of the ROLLER'S special saw blade 2" / 4"
in combination with ROLLER'S Fox ANC SR with electronic speed regulation.
ROLLER'S special saw blade 150 / 200 / 300
for free-hand sawing and for sawing with power transmitting guide support.
ROLLER'S special saw blade 150
ROLLER'S special saw blade 200
ROLLER'S special saw blade 300
Also for nail-embedded wood, pallets. For hard-to-machine materials, e.g. stainless steel pipes,
hard cast iron pipes, lower speed required e.g. by using ROLLER'S Fox ANC SR with electronic
speed regulation.
ROLLER'S saw blades – for free hand sawing for different purposes.
ROLLER'S saw blade
Metals 3 mm and thicker
ROLLER'S saw blade
Metals 1–3 mm
ROLLER'S saw blade
Metals 1–3 mm (for curved cuts)
ROLLER'S saw blade
Metals 4 mm and thicker,
nail-embedded wood, pallets
ROLLER'S saw blade
All types of wood
ROLLER'S saw blade
Plasterboards, breeze blocks etc.
5. Action in Case of Trouble
5.1. Trouble: Reciprocating saw comes to a stop during cutting,
overload protection activated (ROLLER'S Fox ANC).
Cause: Feeding pressure too high.
•
Blunt saw blade.
•
Unsuitable saw blade (see 2.4.).
•
Worn carbon brushes.
•
ROLLER'S
special saw blade
For free-hand sawing and for sawing with power transmitting guide support.
Only 1 universal saw blade instead of many different saw blades. Resilient
material, highly flexible, also for flush-to-wall sawing. Double tang mounting
with exceptionally wide clamping face for accurate seating and high stabili-
ty. Normal saw blades with single tang do not withstand the high feed pres-
sure during sawing with guide support, they break at the mounting point. Al-
ternating tooth pattern (combo-toothing), specially hardened in the toothing
area. Thus outstanding cutting performance and prolonged service life. Al-
so for hard-to-machine materials, e.g. stainless steel pipes, hard cast iron
pipes, etc., and for sawing nail-embedded wood, pallets.
Lenght Tooth
mm pitch mm
140 3,2
200 3,2
150 1,8/2,5
200 1,8/2,5
300 1,8/2,5
100 1,8
150 1,8
200 1,8
150 1,4
90 1,4
150 2,5
300 4
150 5
150 / 200 / 300
Material Colour Art. no.
(pack of 5)
HSS-Bi red 561001
HSS-Bi red 561002
HSS-Bi red 561005
HSS-Bi red 561003
HSS-Bi red 561004
HSS-Bi red 561101
HSS-Bi red 561103
HSS-Bi red 561102
HSS-Bi 561104
red
HSS-Bi 561107
red
HSS-Bi black 561110
WS black 561111
WS white 561115
eng