Publicité
Les langues disponibles
Les langues disponibles
MOUNT PLATE FOR "CLICK'N GO 2" SNOWPLOW FRAME
Can-Am Outlander
7
Front
8) P ositionand and fasten the adapter a onto the "A" b and
"B" c bended supports using
bolts i and
(8) M8-1.25
all bolts and nuts.
2
1
12
Front
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
7815019
A-7815019
MOUNTING INSTRUCTIONS
BOTTOM VIEW
12
5
8
11
(8) M8-1.25 X 25 mm
self-locking flange nuts l. Tighten
BOTTOM VIEW
9
3
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
2011 MODELS AND LATER
(For 2012 models and newer, go to page 2)
1) R emove the machine screws retaining the protectice plate to
frame. Remove the protective plate. Store the protective plate
since it will not reinstall after the assembly of the adapter.
2) R emove the four machine screws (two on each side)
retaining the front part of the footpegs to frame as
illustrated.
carriage
Front
3) P osition and fasten the bended parts of the "A" b and "B"
c supports against the footpegs using
hex bolts j and
35 mm
l (finger tighten at this time).
10
Front
373955
#
Kimpex
self-locking flange nuts
(2) M8-1.25
10
3
12
Printed in China
BOTTOM VIEW
(4) M8-1.25 X
BOTTOM VIEW
2
12
3
Publicité
