AVS BF57 Instructions D'installation

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood Shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Open hood.
1
Installation Instructions
- Bugflector II
®
Long Fasteners x2
Clean Towel
NOTE: Actual application may vary slightly from illustrations.
- Carflector
®
Short Fasteners x2
Flathead Screwdriver
Locate (2) corner trim pads on underside
of hood. Remove and discard the INBOARD
2
Page 1 of 2
I - Sheet Number BF57 Rev.A
®
Bump On x4
Phillips Screwdriver
fasteners from each trim pad.