Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USDA Cooking Guidelines
NOTE: The United States Department of Agriculture recommends that meat and poultry be cooked to
the following internal temperatures to be sure any harmful bacteria has been killed. Ground turkey and
chicken should be cooked to an internal temperature of 165˚F / 74˚C and ground beef, veal, lamb and
pork be cooked to an internal temperature 160˚F / 71˚C. Whole chicken and turkey should be cooked to
an internal temperature of 180˚F / 82˚C; 170˚F / 77˚C for the breast. Goose and duck should be cooked to
an internal temperature of 180˚F / 82˚C. Fresh beef, veal and lamb, etc., should be cooked to an internal
temperature of at least 145˚F / 63˚C. Fresh pork should be cooked to an internal temperature of at least
160˚F / 71˚C. When re-heating meat and poultry products, they should also be cooked to an internal
temperature of 165˚F / 74˚C.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it
yourself. Any servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Care & Cleaning Instructions
CAUTION: Do not immerse the cord, plug or temperature control probe in water or any other liquid.
CAUTION: To avoid accidental burns, allow your Griddle to cool thoroughly before cleaning.
1. When cooking is completed, turn unit Off and unplug cord from wall outlet. Allow Griddle to cool.
2. Remove temperature control probe from Griddle.
CAUTION: The probe may become hot after use. Allow to cool before handling.
3. If necessary, wipe temperature control case and probe with a damp, soft cloth. Dry temperature
control probe completely. Set aside.
CAUTION: The temperature control probe is not submersible.
4. Remove drip tray; empty contents. Wash Griddle and drip tray in soapy water; rinse and dry
thoroughly.
5. To wash by hand, wash griddle plate with hot soapy water. Dry with towel.
CAUTION: Probe and probe receptacle must be completely dry before use.
6. For stubborn food particles, loosen with a plastic cleaning pad. Avoid hard scouring of the non-
stick finish as this may cause surface scratches. Do not use steel wool, scouring pads, or abrasive
cleaners on any part of the Griddle.
Hints For Care and Use of Ceramic Non-Stick Surface
•
To avoid scratching the non-stick surface, do not stack objects on the grill or griddle cooking plates.
CAUTION: DO NOT USE COOKING SPRAYS. THEY CAN CAUSE A BUILD-UP ON THE COOKING
PLATES AND MAY AFFECT THE NON-STICK PERFORMANCE OF THE PRODUCT.
•
Use medium to low heat for best cooking results. Very high temperatures can cause discoloration
and shorten the life span of any non-stick surface. If higher temperatures are necessary, preheat on
medium heat for a few minutes.
•
For best results and preserve the non-stick coating longer, use nylon, plastic, wooden or rubber
utensils. Never cut food on the Griddle.
•
Remove stubborn stains with a plastic scouring pad and mild dish washing liquid; DO NOT USE
STEEL WOOL as it will damage the non-stick surface of the cooking plates.
Steps For Stain Removal and Proper Care of Your Ceramic Non-Stick Coating
1. Identify stained areas on the cooking surface and sprinkle some baking soda on the stains.
2. Moisten the baking soda to get a paste like texture by adding some water.
3. Let the paste stand for a few minutes on the stains (not more than an hour).
4. Rub with a soft damp cloth or lightly scrub with a plastic scouring pad, wipe clean and dry
thoroughly.
NOTE: Do not rub vigorously when using a plastic scouring pad and NEVER use a metal scouring
pad as this may damage the non-stick coating.
5. Repeat the cycle once again if necessary. The performance and non-stick property of the ceramic
non-stick coating will not be affected due to stains.
SO-314276_14648_BELLA_12x22 Griddle ceramic TI_WMUS_IM.indd 6-7
6
Limited TWO-YEAR Warranty
SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date
of purchase, this product will be free from mechanical defects in material and
workmanship, and for 90 days in respect to non-mechanical parts. At its sole
discretion, SENSIO Inc. will either repair or replace the product found to be
defective, or issue a refund on the product during the warranty period.
The warranty is only valid for the original retail purchaser from the date of initial
retail purchase and is not transferable. Keep the original sales receipt, as proof
of purchase is required to obtain warranty validation. Retail stores selling this
product do not have the right to alter, modify, or in any way revise the terms and
conditions of the warranty.
EXCLUSIONS:
The warranty does not cover normal wear of parts or damage resulting from
any of the following: negligent use of the product, use of improper voltage or
current, improper routine maintenance, use contrary to the operating instructions,
disassembly, repair, or alteration by anyone other than qualified SENSIO Inc.
personnel. Also, the warranty does not cover Acts of God such as fire, floods,
hurricanes, or tornadoes.
SENSIO Inc. shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Apart from the extent
prohibited by applicable law, any implied warranty of merchantability or fitness
for a particular purpose is limited in time to the duration of the warranty. Some
states, provinces or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on how long an implied
warranty lasts, and therefore, the above exclusions or limitations may not apply to
you. The warranty covers specific legal rights which may vary by state, province
and/or jurisdiction.
HOW TO OBTAIN WARRANTY SERVICE:
You must contact Customer Service at our toll-free number: 1-866-832-4843.
A Customer Service Representative will attempt to resolve warranty issues
over the phone. If the Customer Service Representative is unable to resolve the
problem, you will be provided with a case number and asked to return the product
to SENSIO Inc. Attach a tag to the product that includes: your name, address,
daytime contact telephone number, case number, and description of the problem.
Also, include a copy of the original sales receipt. Carefully package the tagged
product with the sales receipt, and send it (with shipping and insurance prepaid)
to SENSIO Inc.'s address. SENSIO Inc. shall bear no responsibility or liability for
the returned product while in transit to SENSIO Inc.'s Customer Service Center.
7
2017-05-15 3:49 PM
Publicité
Table des Matières
