Using Other External Components; Front Aux; Av-In - JVC KW-ADV794 Manuel D'instructions

Using other external components

To display the source control screen (☞ below)
Source type ("AV-IN" or

"Front AUX")

[Mode]* Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[AV MENU] Displays <AV Menu> screen.
* Appears when "AV-IN" is selected as the source.
Front AUX
1
Connect an external component.
3.5 mm stereo mini plug
(not supplied)
2
Select "Front AUX" as the source.
12)
3
Turn on the connected component and
start playing the source.
• The operation buttons disappear by touching the screen or when no
operation is done for about 5 seconds.
• To change settings for video playback, ☞ page 40.
AV-IN name* ( ☞ below)
*
☞
( page
29
Sound mode ( ☞ page 36)

AV-IN

You can connect an external component to the LINE IN/
VIDEO IN jacks. (☞ Installation/Connection Manual)
Preparation:
• To listen to the music from the connected
component, select <AV-IN> for <Audio Input>
setting. (☞ page 45 )
• To watch the video from the connected component,
select <AV-IN> for <Video Input> setting. (☞
page 45 )
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
☞
( page 12)