Python 4110P Guide Du Propriétaire page 9

Disabling (optional) Starter Kill
If your remote control is lost or damaged, you can manually override
the starter kill. To do this, you must have the ve hi cle's ignition key and
know where the Valet button is located. Be sure to check with the in-
staller for the location of the Valet button.
To override the starter kill, turn the ignition on and press and release
the valet button within10 seconds. The vehicle should start. If it does
not start, you may have waited too long; turn the ignition off and repeat
the process.
Location of Valet button: ____________________
Remote Start
This feature allows you to remotely start and run your vehicle for a
pro gram ma ble period of time. This makes it possible to warm up the
engine, and adjust the interior tem per a ture of the ve hi cle with the cli-
mate control system. If interior heating or cooling is desired, the climate
controls must be preset, and the fan blower must be set to the desired
level prior to remote starting the vehicle.
AUX
AUX
To remote start the vehicle:
• Press the
• The parking lights flash to confirm that the vehicle is attempting to
start. In gasoline vehicles the engine will start 4 seconds after the
parking lights flash, in diesel vehicles the engine starts after the
WAIT-TO-START timer has expired.
6
Warning! (1) Never remote start your vehicle when
the keys are in the ignition, except when performing
Valet Take-Over, and (2) Never start the vehicle if it
AUX
is not in PARK or NEUTRAL
button on the remote control for 1 second.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
© 2014 Directed. All rights reserved.