Python 4110P Guide Du Propriétaire page 7

Button
AUX
AUX
The remote start function of your system is controlled by pressing this
AUX
button for one second.
AUX
AUX
and
AUX
Car Finder is controlled by pressing these two buttons.
and and
When simultaneously pressed these buttons control the optional rear
window defogger during remote starting. The parking lights flash three
AUX
AUX
times to confirm activation. Once activated the defogger will turn on
AUX
whenever the vehicle is remote started.
The parking lights flash twice when the defogger is deactivated. The
defogger does not turn on when the vehicle is remote started.
Important note: Defogger is an optional feature. Additional parts and
labor may be required. See your Directed dealer for details.
Buttons
and
Timer mode is activated when these buttons are pressed simultaneously.
AUX
AUX
When you activate timer mode the parking lights flash four times, after a
AUX
AUX
AUX
1-second delay the engine starts. To turn the engine off, without exiting
AUX
timer mode press the
The system remains in timer mode and will start every 3 hours for a
maximum of 6 starts unless cancelled by turning on the ignition, or by
activating the brake or neutral safety shutdown wires.
The parking lights flash 4 times indicating timer mode is exited.
4
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Buttons
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Buttons
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then
© 2014 Directed. All rights reserved.