Special Safety Rules - EDM Product 08721 Manuel D'instructions

Service
ES ES
▶ Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
PT PT

SPECIAL SAFETY RULES

· Always use proper guard with grinding wheel. A guard protects
EN EN
operator from broken wheel fragments.
· Accessories must be rated for at least the speed recommended on
the tool warning label. Wheels and other accessories running over
rated speed can fly apart and cause injury.
FR FR
· Hold tool by insulated gripping surfaces when performing an ope-
ration where the cutting tool may contact hidden wiring or its own
cord.
· Make sure the grinding wheel is not contacting the work piece
before the switch is turned on.
· Grinding wheel and guard must be securely attached as described
in this operating manual before connecting the angle grinder to
power source.
· Grinding wheel must be stored in a dry place.
· Always hold the grinder firmly with two hands while working and
at all times when it is running.
· Use only quality certified grinding wheels.
· Keep hands away from rotating parts.
· Be careful not to damage the spindle, outer flange and inner
flange.
· Damage to these parts could result in wheel breakage.
· When starting the tool (install with a new or replacement wheel),
hold the tool in a well protected area and let it run for one minute to
check if the wheel is good or not. Never starting the tool while the
operator is standing at in line with the wheel.
Instruction manual Ref. 08721