EDM Product 08721 Manuel D'instructions page 25

switch or plugging in power tools that have the switch in invites
accidents.
▶ Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of a power
tool may result in personal injury.
▶ Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situa-
tions.
▶ Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can get caught in moving parts.
▶ If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust- related hazards.
Power tool use and care
▶ Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it is designed.
▶ Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dange-
rous and must be repaired.
▶ Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, chan-
ging accessories, or storing power tools. Such preventative safety
measures reduce the risk of starting power tools accidentally.
▶ Store idle power tools out of reach of children and do not allow
persons unfamiliar with the power tool or these instructions to ope-
rate the power tool. Power tools are dangerous in the hands of
untrained users.
▶ Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintai-
ned power tools.
▶ Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and easier to
control.
▶ Use the power tool, accessories and tool bits etc. in accordance
with these instructions and in the manner intended for the particu-
lar type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Instruction manual Ref. 08721
ES
PT
EN
FR