EDM Product 08721 Manuel D'instructions page 24

GERNERAL POWER TOOL SAFETY WARNINGS
ES ES
Work area safety
▶ Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
PT PT
▶ Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool.
EN EN
Distractions can cause you to lose control.
Electrical safety
FR FR
▶ Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk
of shock.
▶ Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water ente-
ring the power tool will increase the risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
▶ When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use redu-
ces the risk of electric shock.
▶ If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD redu-
ces the risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious perso-
nal injury.
▶ Use safety equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce
personal injuries
▶ Prevent unintentional starting. Ensure the switch is in the off-posi-
tion before connecting to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with your fingers on the
Instruction manual Ref. 08721