Yakima QuickBack 2 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adjust support arms.
Loosen
side knob.
Load bikes.
• Match the seat tube to the stabilizing cradle.
• Pull the rubber straps securely over the tubes.
• Use Wheel Strap to
secure rear bike's front
wheel to its frame.
1033626B-6/24
A Yakima TubeTop
(see cover page)
load heaviest
to carry your bike
bike first.
bikes properly can
result in property
damage, personal
may be required
safely.
Failure to load
tubetop
injury, or death.
Bikes should be as level as possible to avoid ground
clearance issues and possible ejections
Adjust arms to be tilted up
slightly. Fully tighten side knob.
Make sure the
chain straps are
fully engaged!
• When loading additional
bikes alternate bike
directions to avoid
interference.
• Use Long Strap to secure
bikes to carrier's frame.
• Secure loose strap ends.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Quickback 3

Table des Matières