Basic Safety Instructions; Design And Functionality; Basic Design; Design Of The Receiver/Baby Unit - Hama BC-100 Mode D'emploi

Basic safety instructions

Observe the following safety instructions to ensure safe handling of
the device:
GB ■ The device should only be assembled by adults. Keep small parts
out of reach of children during assembly.
■ Do not let children play with parts of the device or the device
itself. Ensure that the baby monitor units, power supply adapter
and connection cable are always kept out of reach of babies.
■ Never cover the device (e.g. with a towel or blanket).
■ Faulty components may be replaced with original spare parts
only. Only original spare parts can guarantee that applicable
safety requirements are adhered to.

Design and functionality

Basic design

The "Baby-Control" is comprised of one parent unit and one baby
unit, which communicate with each other over a wireless connection.
This device provides you with sensor-controlled acoustical monitoring
of babies and persons who need to be monitored.
The data recorded by the microphone on the baby unit are
transmitted to the parent unit, where it can be heard over the
loudspeaker. The parent unit is also equipped with four LEDs to
indicate the volume.
NOTE
► The baby monitor is only intended as a support aid, and is not a
substitute for responsible and proper care by an adult.
28
00092667bda.indd Abs3:28-Abs3:29 00092667bda.indd Abs3:28-Abs3:29
All manuals and user guides at all-guides.com
Baby-Control BC-100

Design of the receiver/baby unit:

Design of the receiver/parent unit:

Baby-Control BC-100
GB
1 ON/OFF battery display
2 Operation selection switch
3 Channel selection switch
4 Transmission indicator
5 Socket for power supply adapter
6 Microphone
7 ON/OFF battery display
8 Loudspeaker
9 Volume control ON/OFF
10 Channel selection switch
11 LED reception indicator
12 Socket for power supply adapter
29
27.10.2009 15:58:00 Uhr 27.10.2009 15:58:00 Uhr