Setting The Buzzer - Omron MC-521-E Mode D'emploi

MC-521-E_A_M_main.book Page 5 Monday, April 16, 2018 5:11 PM
2. Preparation
2.3

Setting the Buzzer

The buzzer is only available in the Ear Measurement Mode.
The buzzer is set on as default.
1.
Press the ON/MEM button to turn on the unit.
2.
Press and hold the ON/MEM button for 3 seconds.
The " " symbol flashes on the display.
3.
Release the ON/MEM button.
The " " symbol remains lit and the buzzer is set to off.
Notes:
• If the ON/MEM button is pressed down for more than 5 seconds after the " " flashing,
the unit turns off without setting the buzzer.
• To turn the buzzer on, start from step1.
EN
5