Attaching The Flag; Attaching The Trailer To Bike - CoPilot MODEL T Mode D'emploi

above (for taller children)or through (for smaller children) the horizontal loops E.
Figure . For the first child, secure shoulder straps A and B to crotch strap 1. For the
5B
second child, secure shoulder strap C and D to crotch strap
2. Adjust the length of the shoulder straps and crotch
straps so that both children are held snugly in place. The
crotch straps should be adjusted so that the children do
not slide too far forward. Make sure that the shoulder
straps and crotch straps are snug and secure for the safety
of the children and the stability of the trailer. Attach the
seat belt across both childrens' laps.

ATTACHING THE FLAG

A three piece safety flag is included with the trailer.
It should always be used whenever you tow the trailer.
Insert the ends of each section into the orange
connectors to assemble, and insert into the canopy
O-ring on sewn sleeve on the rear corner of the trailer.
Figure .
6A

ATTACHING THE TRAILER TO BIKE

7A
Remove rear wheel bolt. Attach quick release mounting bolt to the wheel. Re-tighten
rear wheel bolt. Attach quick release pin to the trailer arm and latch securely.
Figure , and .
7A 7B 7C
7B
E
5B
6A
7C
english |
9