General Safety Instructions - Dremel 2000 VERSATIP Notice D'utilisation

Before using the Dremel Versatip, make sure you completely read and understand this manual.
WARNING
!
shock, fire and/or serious injury.
1. WORK AREA
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not keep or bring combustible materials near the tool.
c. Keep children and bystanders away while operating the tool. Distractions can cause you to lose control.
d. Only use outside or in well-ventilated rooms.
2. PERSONAL SAFETY
a. Stay alert, watch what you are doing and use common sense when operating the tool. Do not use the tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of inattention while operating tools may result in serious
personal injury.
b. Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c. Do not overreach. Keep proper footing and balance at all times. This enables better control of the tool in unexpected situations.
d. Dress properly. There is a danger of burning yourself with the flame or with liquid soldering tin. Wear protective clothing to
protect yourself against burns. Keep your hair, clothing and gloves away from flame. Loose clothes or long hair can catch fire.
e. Secure the workpiece. Use a clamping device to hold the workpiece. This allows you to use both hands to operate the tool.
f. Keep this manual for future reference.
g. Do not use the appliance when it is leaking, shows any sign of damage or is malfunctioning.
h. If the appliance is leaking (gas smell) immediately take it outside and check the tightness without a flame, please always use
soap sud. Filling or refilling the gas cylinder must be done in a well ventilated place far away from any possible sources of
ignition, open flames, pilot lights, electrical cookware and away from other persons. Be sure to observe the safety instructions
and warning notices on the refill cylinder do not make any modifications to the appliance.
3. TOOL USE AND CARE
a. Store your tool in an appropriate place with an ambient temperature between 10°C and 50°C. Allow your tool to cool off
completely before storing. Unused tools should be stored away from children in a dry location. Switch off all unused tools.
WARNING
b. Always allow the tool to cool fully before removing / replacing tips and / or installing / replacing the nozzle.
!
WARNING
c. ! Extremely flammable gas under pressure.
WARNING
!
d. Do not use near spark or open flame.
WARNING
e. Do not puncture or incinerate container or store at temperature above 50ºC.
!
WARNING
f. ! Keep out of reach of children.
WARNING
g. Do not try to disassemble this unit.
!
The Dremel Versatip is intended for a variety of applications you will find in the chapter "USE".

GENERAL SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric
INTENDED USE
ENVIRONMENT
GB GB
4