ABB BULLET Quick-Connect LT38P-QC Serie Manuel D'instructions page 2

Instruction
for the following product part numbers:
LT38P-QC-X; LT50P-QC-X; LT75P-QC-X;
LT100P-QC-X
Replace the "X" in the part number by one of the following:
B = black , G = gray, LG = light gray
1. Cut conduit clean and square.
2. Insert conduit through gland-nut
opening and push conduit firmly to
bottom with slight twist (Figure 1).
3. Tighten gland-nut by hand or with a
wrench to bottom on body shoulder
(Figure 2).
Figure 1
2 of 4
Figure 2