Axis T86 Serie Guide D'installation page 17

detectors, etc. When a signal is received the state changes and the input becomes
active (shown under System Options > Port & Devices > Port Status).
6-pin terminal blocks for:
• Digital Input/Output
• Power (DC output)
• 0 V DC (-)
Function
0 V DC (-)
DC output
Configurable
I/O 1 (Input or Output)
Configurable
I/O 2 (Input or Output)
Network connector dip switches
Important
Always use the default dip switch setting (position B) if the relationship between devices in
the system is not defined.
The camera attaches a particular VLAN tag to all its forwarded multicast packages. The media
converter switch manages how these multicast packages are forwarded between cameras, media
converter switches and other network devices. This is especially useful when connecting the camera
and media converter switch to the network in a daisy chain.
By changing the position of the dip switches, each network connector port in the media converter
switch can be configured to manage multicasts in three different ways.
AXIS T86 Media Converter Switch Series
Pin Notes
1, 4, 6
2
Power out
3
Digital input
Digital output (transistor –
open collector)
5
Digital input
Digital output (transistor –
open collector)
17
Specifications
0 V DC
12 V DC, 50 mA
0 to max 30 V DC
0 to max 30 V DC,
open drain, 100 mA
0 to max 30 V DC
0 to max 30 V DC,
open drain, 100 mA