Axis T86 Serie Guide D'installation page 15

Camera connectors
Power connector
Two 2-pin terminal blocks for power output (pin 4
is not used).
Function
DC 24 V DC
output
0 V DC (-)
N/A
Network connector
Two 2-pin Ethernet terminal blocks.
I/O terminal connector
2-pin terminal block.
External connectors
Ground screw
AXIS T86 Media Converter Switch Series
Pin Notes
1, 2
Power out to camera
3
4
N/A
15
Ground screw for connecting the media
converter switch to earth ground. Make
sure that both ends of the grounding
wire are in contact with their respective
grounding surfaces.