Cisco CPT 50 Mode D'emploi page 5

Preparing the Rack Room
This section explains how the rack enclosures must be properly connected to the building earth ground.
It also illustrates how to keep the chassis in a sealed antistatic bag until you are ready to install it. (See
Figure
Before performing any of the following procedures, ensure that power is removed from the DC circuit.
Warning
Statement 1003.
Figure 2
78-18960-03
2.)
Rack Room Connected to Earth Ground
Chassis protected
in antistatic bag
Electrostatic Discharge and Grounding Guide for Cisco CPT and Cisco ONS Platforms
Prerequisites
Earth ground
5