Hkoenig EXP820 Manuel D'utilisation page 9

Steam milk foam function
1．Press " " and then" ". At this time, the " " indicator starts flashing until the indicator
turns on normally and the preheating is completed
2．Pour the iced whole milk into the latte art cup 1/3 of the way, insert the steam nozzle 1CM into
the milk surface, then slowly unscrew the "steam knob" until the steam starts to come out.
(Note: Steam size can be adjusted according to personal proficiency. Release a little water in the
steam pipe before foaming)
3．When the temperature of milk reaches about 75 degrees and the milk foam begins to inflate,
you can twist the "steam knob" to " " and press " "to close.
Hot water function
Press the " " switch, turn the "steam knob" to" ", and the steam pipe starts to
continuously discharge hot water; Turn the "steam knob " to" "stop the hot water.
Additional function -- memory coffee making function
1．After the machine is heated up (when the " " and " " indicator lights become stay
on, press and hold the " " button , and the funnel starts to pour coffee. When the desired
amount is reached, then release the " " button, you will listen a sound from the machine. That
means the time has been memorized. The next time you press the " " button, press this time