Organisational Measures; Protection Equipment; Informal Safety Measures; Operator's Working Position - Parker EOMAT ECO Guide D'utilisation

EOMAT ECO

1.9. Organisational measures

The requisite personal protection wear is to be made available by the operating company
and always maintained in a functional condition.
All the available safety equipment should be regularly checked.
1.10.

Protection equipment

Each time before the machine is used, all protection equipment must be properly installed
and be capable of functioning correctly.
1.11.

Informal safety measures

The Operating Manual should always be kept at the machine.
-
Complementing the Operating Manual, generally applicable and also local regula-
-
tions regarding electrical supply, accident prevention, health and safety standards and
environment protection should be made available and should be observed.
All safety and danger notices on the machine should be maintained in legible condi-
-
tion and renewed as necessary.
1.12.

Operator's working position

In normal working mode the operator's working position is immediately in front of the ma-
chine. The controls are arranged so that he can operate them from this position.
No special working positions are provided for installation or maintenance.
2. Safety advice throughout the life of the machine

2.1. Erection and installation

The machine may be moved and set up only by a means of transportation suitable for the
weight of the machine. The machine must be located on an area suitable for the weight of
the machine and its tooling. A secure position must be provided for the machine when it is
set up. The machine may be operated only by personnel trained and authorised for the
purpose, who are familiar with the Operating Manual and can work accordingly.

2.2. Safety measures during normal operation

The machine should be operated only if all the protective equipment is fully functional. Be-
fore switching the machine on, ensure that nobody can be endangered by the machine or
by any movement of the tubing being formed. The machine should be checked regularly
for externally visible damage and for the functionality of the safety equipment.
Page 11 EOMATECO/MANUAL