Other Connections - Salora LANGATON32 SO Mode D'emploi

Other Connections

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Connector Type
Component
COMPONENT
Video
Connection
(back)
HDMI
Connection
(back&side)
VGA
Connection
(back)
VGA/
Component
AUDIO IN
Audio
Connection
(back)
SPDIF
SPDIF
(Coaxial Out)
Connection
(back)
Composite
COMPOSITE
(Audio/Video)
Connection
(back)
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
LAN
Ethernet
Connection
(back)
24V DC
Connection
(back)
Cables
VGA to Component Connection Cable
Audio Cable
Component/VGA
Audio Video Cable
LAN / Ethernet Cable
English - 5 -
To enable VGA/Component audio,
Device
you will need to use the back audio
inputs with a VGA/Component
audio cable for audio connection.
Insert or remove the CI module only
when the TV is SWITCHED OFF. You
should refer to the module instruction
manual for details of the settings.
The USB inputs on the TV support
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your TV.
When connecting equipment using a
HDMI cable to your TV, to guarantee
sufficient immunity against parasitic
frequency radiation and trouble-free
transmission of high definition sig-
nals, such as 4K content, you have
to use a high speed shielded (high
grade) HDMI cable with ferrites.