Product Introduction; Front View; Rear View; Connections - Salora LED1938DVX Mode D'emploi

Product Introduction

Front View

LED indicator Remote Control window(keep clear)
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED indicator: Press POWER to turn on and off.
Indicator on(Red)
Indicator on(Green)
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.

Rear View

Wall Mounting
The TV is provided with mounting holes for a VESA approved wallmounting bracket (NOT SUPPLIED).
Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the
basemounting bracket).Mount the VESA bracket using 4xM4x10mm ISO metric threaded screws (not
supplied). Do not use screws longer than 10mm, it will occur damage to the internal parts. Fit the wall
bracket securely following themanufacturers instructions.
All manuals and user guides at all-guides.com
Standby mode
Power on mode
0
to the left or right side and 20
4
(EJECT): Eject the disc.
(PLAY): Play/pause the disc playing.
VOL+/-: Adjust the volume.
CH+/-: Scan through channels.
INPUT: Display the input source menu.
MENU: Display/exit the OSD menu.
(POWER): Turn on/standby the TV set.
DVD: Insert a 12cm disc according to the silk.
0
above or below the control

Connections

See next page
Product Introduction