Technical Specifications; Functions And Controls - Nicols DP 615 Guide D'utilisation

Technical specifications

1/
Power input
Channel output
DMX interface
Analog In/Out
Dimensions
Weight

2/ Functions and controls

- Set DMX Address
Start Address; set up start address for each channel: Ch ( )addr: ( ); Ch(1---6)Addr:( 1---512)
Patch address: Patch addr: ( ); Patch addr: (1---512)
Set up a series address.
- Set channels data
Set preheat; Preheat:( ); Preheat:(0---127 );
Set Max Out : Max Out:( ); Max Out:(0---255 );
Set Fadetime: Fade Times:( ); Fade Times:(0---100 );
- Set Scenes
PlayShow; (look up Record Scene)
Play Scenes:( ); Play Scenes:(1---32 );
Preset MAP :( )Select program pattern.
Preset MAP:( ); Preset MAP:( 1---10);
Record scene: Rec Scenes :( ); Rec Scenes:(1---32 );
Fade Times: Fade Times :( ); Fade Times:(0---100 );
DMX Fail;
Black Out：
Run Record Scene：
(Save scene in MAP and running in DMX)
No DMX Scene
Black Out：
Run preset program in MAP
Run Speed :( )
MAP Speed :( ); MAP Speed:(1---100)
3/ Test channel 1-6
CH( )Data( ); CH(1---6 )Data(0---255 );
When you push ENTER you can catch the data in different channel
Set Input
- DMX Only: select DMX Only Enable
- Stand alone only: select MAP Only Enable
- Master: select Master Enable
- Slave: select Slave Enable
AC 230V/50Hz
total 60, per channel Max.10A
3Pin XLR
8Pin
482×329.5×89mm
8.5kg
8