Product Introduction; Technical Specifications - Nicols PAR COB 100 RGBW Notice D'utilisation

INSTALLATION

Product introduction

This product is designed for indoor use. Suitable applications include wash or effect lighting for architectural, stage or
nightclub applications. This product can also be installed for use in signage and advertising using the dynamic
functions available with DMX512 control. Direct input of DMX512 signal allows the units to be controlled from any
DMX512 controller. This product can be operated as a single unit or in multiple units for large applications.
Mounting:
-Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket should be secured to the
mounting truss or structure using a standard mounting clamp. Please note that when hanging the unit a safety cable
should also be used.
-Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
-NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of the product
using the two adjustment knobs located on the side of the fixture.

TECHNICAL SPECIFICATIONS

Voltage: AC100-240V, 50/60Hz
IP rating: IP33
Power: 150W
Light Source: 100W COB RGBW 4in1
Lifespan: around 100,000 hours
Control: DMX 512 (8 CHS)
Control Mode: DMX, Auto, Master/Slave, Sound Active
Dimmer: 0-100%
Strobe: 0-20Hz
Beam angle: 75º
Net Weight：3Kg
Size: 290x220x325mm
DMX Channel instruction
CH Function
CH1 Master Dimmer
CH2 Master Strobe
CH3 Built-in programs
CH4 Speed control
CH5 Red Dimmer
CH6 Green Dimmer
CH7 Blue Dimmer
CH8 White Dimmer
Function Instruction
Red,green,blue,white,yellow linear 0%-100%
dimmer, from dark to bright
Red,green,blue,white,yellow strobe,from slow
to fast
Built-in programs
Speed control ,from slow to fast
Red dimmer, linear 0%-100%
Green dimmer, linear 0%-100%
Blue dimmer, linear 0%-100%
White dimmer, linear 0%-100%