MSI A68HM-E33 V2 Serie Mode D'emploi page 27

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
▶ Current CPU/ DRAM Frequency
These items show the current frequencies of installed CPU and Memory. Read-only.
▶ CPU Base Frequency (MHz) [Default]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value.
Please note that overclocking behavior and stability is not guaranteed. This item
appears when the installed processor supports this function.
▶ Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶ Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶ Adjust CPU-NB Ratio [Auto]
Sets the CPU-NB ratio that is used to determine CPU-NB clock speed.
▶ Adjusted CPU-NB Frequency
Shows the adjusted CPU-NB frequency. Read-only.
▶ Adjust Turbo Core Ratio [Auto]
Specifies the Turbo Core frequency multiplier.
▶ Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
▶ Adjust GPU Engine Frequency [Auto]
Adjust GPU Engine Frequency.
▶ Adjusted GPU Engine Frequency
Shows the adjusted GPU Engine frequency. Read-only.
▶ DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶ Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶ Intel Extreme Memory Profile (XMP) [Disabled]
XMP is the overclocking technology by memory module. This item will be available
when you install the memory modules that support XMP technology. When the XMP
is Enabled, the AMP will be forced to be disabled.
[Disabled]
Disables this function.
[Profile 1]
Uses profile1 over-clocking settings of installed XMP memory
module.
[Profile 2]
Uses profile2 over-clocking settings of installed XMP memory
module.
27

Publicité

Table des Matières
loading

Table des Matières