Integration With Airzone Systems; System Identification; Requests Workflow - Airzone AZAI6WSPMEL Mode D'emploi

INTEGRATION WITH AIRZONE SYSTEMS

Important: Webserver Airzone Cloud Ethernet (AZX6WEBSCLOUDC or AZX6WSCLOUDDINC) must have the 3.1.6
version or higher.
ES

SYSTEM IDENTIFICATION

EN
To start the configuration process, it is necessary to identify the system, to do this, remove the Blueface thermostat from its
F
base and check the code printed on the label located on the back of the thermostat.
R
IT
PT
DE
Depending on the code printed on the label the system will be configured in different ways, for further information, please
refer to the documentation related to each system:
AZCE6
AZDI6
AZRA6
AZVAF
AZZBS
The Aidoo Pro system (AZAI6WSPxxx) does not have thermostats, but you can identify it by finding your Aidoo Pro device:

REQUESTS WORKFLOW

Requests are made pointed to an address, port and application.
e.g http://XXX.XXX.XXX.XX:3000/api/v1/xxx
Where XXX.XXX.XXX.XX is the IP address of the Airzone Webserver and the port is 3000
The Airzone system allows the control of the zones and parameters via PUT and POST requests.
POST method: extract system data.
12
Identification
Flexa 3.0 / Innobus Pro6 System
Acuazone / Innobus Pro32 System
RadianT365 System
VAF System
ZBS System
Related documentation
Quick Guide Installation Manual
Quick Guide Installation Manual
Quick Guide Installation Manual
Quick Guide Installation Manual
Quick Guide Installation Manual