One for All URC-3740 Mode D'emploi page 8

Example: To set up the ONE FOR ALL 4 for your television:
1
0361 0349 0505 0010
Bazin 0217
Beko 0370 0486 0037 0606
Bennett 0556 0037
Beon 0037 0418 0032
Best 0337 0370 0421
Bestar 0037 0370 0374
Binatone 0217
Black Star 0247
Blacktron 0282
Blackway 0282
Blaupunkt 0554 0191 0535 0195
0200 0213 0327 0328
0318 0448
B
2
3
4
_ _ _ _
5
6.
- If your device does not respond, follow steps 1 to 5 with each code listed
for your brand. If none of the codes listed for your brand operate your
device OR if you your brand is not listed at all, try the search method
described on page 9.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- Remember to press the correct device key before operating your device.
Only one device can be assigned to a device mode. If your original remote
operates more than one device, you need to set up each device separately.
- If you find that some functions are missing you can either "learn" them
from your original remote or use "Key Magic®" if your original remote is
broken.
8
Direct code set up
Find the code for your device (e.g. Bennett
Television) in the Code list (page 164 - 182 in the
manual). Codes are listed by device type and brand
name. The most popular code is listed first.
Make sure your device is switched on
(not on standby).
Press the TV key on the ONE FOR ALL 4 to select the
device you wish to Set-Up.
Press and hold down the MAGIC key
(for approximately 3 seconds) until
the red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
Enter your four-digit device code using the number
keys (e.g. Bennett code 0556). The red LED will
blink twice to confirm that the code is stored.
Now, aim the ONE FOR ALL 4 at your device and press
OFF. If your device switches off, the ONE FOR ALL 4
is ready to operate your device.
Next, switch your device back on (pressing ON, a
number key or CH+) and try all the remote's
functions to ensure they are working properly.
If the functions do not work properly, repeat steps 1-5
using another code listed under your brand.
WWW ONEFORALL COM
x2