PRO-POINT 8535148 Manuel D'utilisateur page 8

V 3.06
6. When operating a power tool outside, use an outdoor
extension cord marked "W-A" or "W". These cords are rated
for outdoor use and reduce the risk of electric shock. Use in
conjunction with a Ground Fault Circuit Interrupter (GFCI).
If operating a power tool in a damp location is unavoidable,
the use of a GFCI reduces the risk of electric shock. It is
recommended that the GFCI should have a rated residual
current of 30 mA or less.
7. Avoid using an unnecessarily long extension cord. Choose a
cord that is appropriate for the situation, as a cord that is too
long and running across the floor can be more dangerous
than helpful. Using a cord that is too long or too thin could
damage the tool. Unroll the cord completely to prevent it
from overheating.
8. Place the electrical cord in a position that prevents it from
coming into contact with the tool and from getting caught
by the work piece. The cord should always stay behind
the tool.
TOOL USE AND CARE
1. Use the correct tool for the job. Maximize tool performance
and safety by using the tool for its intended task.
2. Do not modify this tool or use for a purpose for which it was
not designed.
3. This tool was designed for a specific function.
Do Not:
a. Modify or alter the tool; all parts and accessories are
designed with built-it safety features that may be
compromised if altered.
b. Use the tool in a way for which it was not designed.
UNPACKING
1. Carefully remove the tool from the package.
2. Retain packing material until you have carefully inspected
and satisfactorily installed or operated the tool.
8
6/12/24V Battery Charger
For technical questions call 1-800-665-8685
8535148