PRO-POINT 8535148 Manuel D'utilisateur page 14

V 3.06
Hydrometer
Reading
(Battery
Specific
Gravity)
Ammeter Reading
1.265
1.225
1.190
1.155
1.120
3. Charge the battery for the time indicated on the chart. A
more precise method of determining the length of charge
time requires the use of the following formulas, the reserve
Capacity or Ampere Hour rating of the battery, and the
percent of charge needed to bring the battery to full charge.
4. If the only battery rating known is the Reserve Capacity,
you must first convert it to Ampere Hours using the
following formula:
Example: Reserve Capacity of Battery = 60 Minutes
5. With the battery Ampere Hour rating and the percent of
charge needed to bring the battery to full charge, use the
following formula to determine the length of charge time of
battery selected on the charger:
NOTE: Express the percent of charge needed as a decimal
(25% = .25). Amp output for charge rate settings: 12V Low = 2
Amps, 12V Medium = 40 Amps, 6 or 12V High = 60 Amps.
14
6/12/24V Battery Charger
Battery 6 Volt Battery
Tester Charging Time
Reading (Minutes)
(Percent
Charge)
60
100% Full charge
75% 27
50% 55
25% 85
0% 110
For technical questions call 1-800-665-8685
12 Volt Battery Charging
Time (Minutes)
60 40
Full charge
15 20
35 45
50 65
65 85
8535148
20
400
800
1200
1600