Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
38
Manual station storage
Press the
/
buttons to tune to your favourite station. Press the MEM
button. P01" is displayed on the screen. If you press the PR- or PR+ button
within 3 seconds, you can select the memory location. Press the MEM
button within 3 seconds to save. You can store up to 20 radio stations.
In the American version of the FM frequency, the frequency changes in steps
of 0.1 MHz, in the European version in steps of 0.5 MHz. Extend the antenna
of the device completely to get the best possible reception (the FM antenna
is located on the back of the device).
Note: If you want to save radio stations, the radio station you want to
save must have good signal reception, otherwise it will not play even if
the frequency is saved.

CD MODE

1.
Press the MODE button until the screen displays „----". Then the screen
displays the number of tracks on the CD and playback starts.
2. Press the OPEN/CLOSE button on the control panel or the EJECT button
on the remote control to open the CD tray.
3. Insert a CD into the CD tray with the label side facing up and the face
down.
4. Press the OPEN/CLOSE button on the control panel or the EJECT button
on the remote control again to close the CD tray.
5. Press the button
6. Press the REP button once to repeat a track. The „REP" indicator will
flash in the upper left corner of the screen. If you press the REP button
again, all the tracks on the CD will be repeated. The „REP" indicator
appears in the upper left corner of the screen. Pressing the REP button
again will cancel the repeat function.
7. Press and hold the REP button until „RAN" is displayed on the screen for
random play.
to select the desired track.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10034802

Table des Matières