ASATech signolux Mode D'emploi page 3

Congratulations on purchasing
•
your »sign lux pager«.
We hope it will give you many
years of reassuring operation.
You have purchased a modern
and reliable system.
Please read these operating
instructions carefully. They tell
you how to set up the system
correctly and explain all the sys-
tem's features.
Package contents
Please check if all of the follo-
wing components are included:
•
- »sign lux-pager«
- carrying cord
- 2 pcs 1,5 V size AAA batteries
- manual
- warranty card
If any parts are missing, please
immediately contact your dealer
or the manufacturer directly.
Function
The portable »sign
is a receiver for the signals of
the various »sign
mitters and indicates these as
vibration impulses.
6 indicator LEDs with symbols
help to distinguish the signal
source.
•
lux-pager«
•
lux« trans-
Signals and controls
Indicator-LEDs:
The 6 indicator-LEDs help to
distinguish between the various
signal sources. They light up for
a total of 40 seconds when the
according signal is received.
Battery status indicator:
The receiver informs about
the state of the batteries of the
receiver as well as the batteries
of the transmitters:
- A sufficient battery level of the
receiver is indicated by the red
control lamp flashing every 5 to
6 seconds.
- A low battery level of the recei-
ver is indicated by the red con-
trol lamp flashing in short se-
quence (once per second).
Please replace (or where appli-
cable, recharge) the receiver
batteries as soon as possible.
- A low battery level of a trans-
mitter is indicated by the red
control lamp shining together
with the symbol of the accor-
ding transmitter when it's sig-
nal is triggered.
Please replace (or where appli-
cable, recharge) the batteries
of the according transmitter as
soon as possible.
English 3