Castel XELLIP Serie Fiche Technique page 15

XELLIP MONITOR
ADDITIONAL FUNCTIONS OF THE XE MONITOR YOKIS
Functions of Yokis buttons
After synchronizing with the YOKIS Gateway (not included), configure the Yokis menu buttons to trigger preconfigured
scenarios of a Hub.
The Yokis buttons are used to trigger
•
manage automatic shutters
•
manage lighting
For more information: www.yokis.fr or contact your Castel contact
ADDITIONAL FUNCTIONS OF THE XE MONITOR CCTV
CCTV cameras
This menu is used to define the IP CCTV camera (s) that can be displayed on the extension screen. It also allows you
to define if you want to display them instead of the screen saver.
Association SIP/Cameras
This menu allows you to select which IP CCTV cameras can be displayed during a call to a particular SIP extension,
allowing you to switch to them while communicating with this extension. It is thus possible to define different cameras
for each calling station. When calling one of these stations, the user can switch between the video stream of the
calling station or each of the IP video surveillance cameras associated with it.
Programmable button functions
Each button can be programmed and is used to:
• Call 1 to 10 stations simultaneously or with timeout
• Control the local relay, the relay of the station on a call
• Send a DTMF code
• End a call
• Carry out various other actions ...
Functions of Yokis buttons
After synchronizing with the YOKIS Gateway (not included), configure the Yokis menu buttons to trigger preconfigured
scenarios of a Hub.
The Yokis buttons are used to trigger
•
manage automatic shutters
•
manage lighting
For more information: www.yokis.fr or contact your Castel contact
Datasheet n° 604-0032G www.castel.fr
FR
EN
Page 15 / 16