Castel XELLIP Serie Fiche Technique page 14

XELLIP MONITOR
Logical relations configuration
The web server is the start point to configure automatism also called relations.
There is two kinds of relations:
•
Schedule: can start actions on identified time slots. There is 3 priority levels for a schedule relation (high,
medium, small)
•
Logical :
↘ Logical condition: can start actions depending on the status. A logical relation can be integrated by
some operator as AND, OR, NOT, XOR. In the same way, a logical relation can start several actions.
↘ Numerical condition: can perform actions by comparing the value of a counter with various thresholds.
It is also possible to add or subtract counter values and compare the results.
Configuration of the user of the web server (software users)
The web server allows granting, modifying or deleting privileges to users by specifying their login, password and
operating language.
Configuration of the call users
The web server allows creating, importing or deleting user phone which is attributed a profile. Therefore a user can log
into the station via a user name and password then activate his profile on the station.
Configuration of the profiles
It's possible to create modify or delete functional profile of the station. Each profile specify a priority of the station, a
configuration of the buttons functions, a configuration of the directory (black list/white list) and security right of station.
The station can operate with a single profile or various profiles according to time slots or according to a user log on the
station.
Configuration of the phone book
It is possible to create, modify or delete entries in the phone book of the station.
It is possible to create entries for single calls or for multiple calls.
Administration management SNMP
The station includes an agent SNMP (Simple Network Management Protocol) to respond to SNMP requests and to
send notifications (traps) to a SNMP manager.
From web pages, you can:
✓ Configure different community (read / write)
✓ Configure system data ("sysContact" and "sysLocation")
✓ Configure notifications (recipient, community ...)
✓ Download "MIB Castel"
It supports SNMPv1 and SNMPv2c versions.
Autotest functions
The station has several tests to validate its functioning:
✓ Autotest "Micro and speaker": to test the remote operation of speakers and microphone. From the page
"Advanced Settings", it is possible to adjust levels of the test following the installation environment. This
test can be triggered from the web server or an SNMP command. The test result is visible through the
history of the web server and an SNMP notification.
✓ Autotest "keys": the detection of a blocked mechanical button (contact for over 20s) is indicated by an
SNMP notification and an event is reported in the history of the web server.
Backup and restoration of the system parameter
It is possible to backup and restore the complete configuration of the station (configuration, profiles, logical relations,
phone book...)
Update software
For the update, you will be provided with a file containing the new software version, if necessary.
You must then download this file via the Web Page. The entry station will restart so as to apply the update. The
update does not modify the user parameters in any way.
Backup on power failure
When a power failure occurs, the station must be able to backup the following:
✓
Counter values
✓
History
✓
Secured events (these events are defined in CASTELServeur)
✓
The states of interfaces
Historic function
The historic allows to visualize the events occurred on the station. Informations displayed are the date and time, the
events and a small description.
Datasheet n° 604-0032G www.castel.fr
FR
EN
Page 14 / 16