Installation Procedure - Bosch HEZ9YZ04UC Mode D'emploi

Installation Procedure

Remove any protective film.
1.
Remove all screws from the factory installed back
2.
panel of the appliance and retain them for Step 5.
Remove all screws from the back of the factory
3.
installed side panel on the side of the appliance where
the extension kit will be affixed and retain the screws
for Step 4.
* Depending on the appliance specifications you need
to remove the bracket by removing the screw on top.
I n s t a l l a t i o n P r o c e d u r e
Place the side panel extension directly behind the
4.
back side of the factory installed side panel and align
screw holes in both panels. Affix the side panel
extension directly to the back of the factory installed
side panel with the screws retained from step 3.
* If you have removed the bracked in step 3, you need
to affix the screw on the top. Do not use the bracket
removed in step 3.
Affix the factory installed back panel retained from
5.
Step 2.
5