Selecting The Location; Rechargeable Battery Power - OHAUS Valor 1000 Serie Guide De Démarrage Rapide

EN-2
measuring the parameters described in these operating instructions. Any other type of use
and operation beyond the limits of technical specifications, without written consent from
OHAUS, is considered as not intended. This instrument complies with current industry
standards and the recognized safety regulations; however, it can constitute a hazard in
use.
If the instrument is not used according to these operating instructions, the intended
protection provided by the instrument may be impaired
2. INSTALLATION
2.1 Unpacking
Carefully remove your Valor 1000 scale and each of its components from the package.
Save the packaging to ensure safe storage and transport.
Please read the manual completely before installing and using the Valor 1000 scale to
avoid incorrect operation.
Components included:
‒
Scale
‒ Quick Start Guide
‒ Power adapter + attaching plug
‒
Stainless steel pan
‒
In-use cover
‒
Sealing cover, screw (for approved T models)

2.2 Selecting the location

The location must be sturdy, flat and level. Avoid locations with excessive air current,
vibration, heat sources or rapid temperature changes. Allow sufficient space around the
instrument.
2.3 Power
Connect the AC Adaptor to the AC mains supply. Connect the plug to the DC jack on the
bottom of the scale. The scale may be operated on the AC Adapter connected to mains
supply or 4 alkaline batteries.
Note: The AC adapter maybe optional or included with the scale, depending on the model.

2.4 Rechargeable Battery Power

Allow the battery to charge for 12 hours before using the scale on battery power. The
instrument can be operated during charging, and the battery is protected against
overcharging. For maximum operating time, the battery should be charged at room
temperature.
Note: Availability is depending on region as accessory.
Scan the QR code to obtain the user manual
Valor TM 1000 Series