Danby DUF206E1SSLDB Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
INDICATORS
High Temperature Alarm
The high temperature alarm will alert you when
the internal temperature of the appliance has
been too high for an extended period of time. The
high temperature indicator on the control panel
will illuminate and the appliance will buzz for ten
seconds every thirty minutes.
In refrigerator mode, the alarm will sound when the
internal temperature is above 15°C (59°F) for more
than 36 hours. The alarm will automatically turn off
when the internal temperature drops below 12°C
(54°F).
In freezer mode, the alarm will sound when the
internal temperature is above -8°C (18°F) for more
than 36 hours. The alarm will automatically turn off
when the internal temperature drops below -12°C
(10°F).
Press any button on the control panel to silence the
high temperature alarm.
Open Door Alarm
If the door remains open for more than 5 minutes,
the door open indicator light will illuminate and a
buzzer will sound. Press any button on the display
or close the door to silence the alarm.
BUTTONS
Up and Down Buttons
Use the up and down buttons to raise or lower the
set temperature.
Press and hold the up and down buttons at the
same time for 3 seconds to change the temperature
display scale between °C and °F.
BUTTONS
Quick Freeze Button
The quick freeze function allows the appliance
to run continually for 3 hours in order to reach
and maintain a temperature of -25°C (-13°F).
After three hours the appliance will automatically
return to normal functioning. The snowfl ake icon
will illuminate when the quick freeze function is
activated. If the appliance is unable to reach -25°C
(-13°F), the quick freeze function will shut off after
24 hours.
Lock Button
The lock button locks the control panel so that no
changes can be made to the programming. Press
the lock button to activate the lock. Press and hold
the lock button for 3 seconds to deactivate the lock.
Freezer / Refrigerator Button
This appliance can function as either a freezer
or a refrigerator. Press and hold the freezer /
refrigerator button for 3 seconds to change the
functioning.
• The upper dot indicates that the appliance is
functioning as a freezer.
• The temperature range for the freezer operation
is -12°C ~ -24°C (10°F ~ -11°F).
• The lower dot indicates that the appliance is
functioning as a refrigerator.
• The temperature range for the refrigerator
operation is 2°C ~ 8°C (35°F ~ 46°F).
Reset
To reset the programming of the appliance, press
and hold the lock button and the up button at
the same time for 3 seconds. The appliance will
beep and all icons on the display will illuminate
for 3 seconds as the internal control board resets.
Normal functioning will resume within 5 minutes.
5