Cleaning The Air Filter; Draining And Cleaning The Drain Tank - Mitsubishi Electric JT-SB216JSH-W-E Mode D'emploi

Masquer les pouces Voir aussi pour JT-SB216JSH-W-E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning the air filter
3
Around once a week
Remove the drain tank
and air filter
Air filter
Handle
NOTE
If the air filter is particularly dirty, clean it with warm or cold water.
After washing the air filter with water, dry it thoroughly.
Never dry the air filter using a heat source such as flames or a dryer.
Cautions
This may damage the filter or cause fires.
Ensure that the air filter is fitted properly.
Dirt and dust may get into the appliance and shorten its working life if the air filter is out of position.

Draining and cleaning the drain tank

4
Before it fills up (at least once a week)
Remove the drain tank
NOTE
Full line
Empty the drain tank regularly.
Cautions
If the drain tank is not emptied it will start to smell, and the drain water may leak onto the floor causing the
floor to become dirty.
Ensure that the drain tank is fitted properly.
Tap gently by hand
Drain tank
Empty the water, and wash the lid and
drain tank.
Drain tank
Empty the drain water at least once a week before the drain water exceeds the full
line.
Use a vacuum
cleaner to remove
dust
or
− 6 −
Reinstall the drain tank and
air filter
Attach the lid
Click
Reinstall the drain tank

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jt-sb216jsh-h-eJt-sb216jsh-s-eJt-sb216ksn-w-e

Table des Matières