How To Use The Appliance; Turning The Power On - Mitsubishi Electric JT-SB216JSH-W-E Mode D'emploi

How to use the appliance

■ Turning the power on

■ After washing hands
1
Wet hands
Automatic Stop Function
The power lamp flashes and the dryer stops automatically if the appliance is used continually for more than
30 seconds. To continue using the hand dryer, remove your hands, and then re-insert them.
Simple heater
Softens the feeling of cold air.
If the room temperature is above 30ºC, the heater will stop working to prevent the temperature from
rising too high.
NOTE
If the room temperature is less than 18ºC, the air may feel cold.
■ If not using for a long period
Turn the power switch "OFF".
How to open
2
Insert hands from the side
All models
JT-SB216JSH type only (not applicable to JT-SB216KSN)
Power
P o w e r
switch
O N
O F F
3
Bring hands upwards
※ Repeat 2-3 times
− 4 −
NOTE
Do not turn the power on
while hands or other objects
are inside the hand drying
area.
4