Table des Matières
Publicité
Torque
Before you start the fitting you must check the type plate to determine
which sketch, in the fitting instruction, is applicable.
1. M12x30 (10.9)
*******M* E: 75 Nm
2. M12x40 (10.9)
*******M* E: 120 Nm
3. M8x30 (10.9)
*******M* E: 25 Nm
4. M12x85 (10.9)
*******M* E: 120 Nm
*******M* P: 75 Nm
*******M* P: 105 Nm
*******M* P: 25 Nm
*******M* P: 105 Nm
© 4021370/10-06-2022/7
Publicité
Table des Matières
