Intended Use - Simons Voss Technologies SmartLocker AXLock Node Guide Abrégé

2. Intended use

purposes.
Qualifications required
The installation and commissioning requires specialized
knowledge.
Only trained personnel may install and commission the

product.
Modifications or further technical developments cannot be
excluded and may be implemented without notice.
The German language version is the original instruction
manual. Other languages (drafting in the contract lan-
guage) are translations of the original instructions.
Read and follow all installation, installation, and commis-
sioning instructions. Pass these instructions and any main-
tenance instructions to the user.
2. Intended use
With LockNode integrated (LNI) installed, you can network
the SmartLocker AX and connect to WaveNet.
3. Installation
You will need the following tools:
0.9 mm hex wrench (included)

Electronics needle-nosed pliers

34 / 196 | EN