Arzum AR 3083 Manuel D'utilisation page 20

teapot and close the teapot lid.
• After putting the intermediate lid on the kettle (container), place the
teapot you prepared on the intermediate lid.
• Plug the cable of your appliance to the socket.
• Start your appliance by pressing the on / off button. The warning light
will turn red to indicate that the heating process has started. During the
heating process,
the warning light will
be red.
• When boiling
process is completed,
a "beep" sound will
be heard 5 times and
your appliance will
automatically switch
to keeping hot position and will save energy. When your appliance
switches to keeping hot position and the warning light will turn to blue.
• To make the brewing process easily, remove
the drip cap. Fill your teapot with water suitable
for the amount of tea you want to brew from
the tap of the samovar and place it again.
• Place the drip cap on its specially designed
area to prevent it from moving. Thanks to the
drip cap, the water flowing from the tap or
overflowing from the glass is prevented from
pouring onto the counter.
• If the water level has dropped below the minimum level, water will not
flow from the tap. In this case, you can add water in your kettle. Your
kettle will automatically switch to boiling water position upon detecting
that the water is cooling down.
20
ARZUM