Simons Voss Technologies SmartLocker AX Guide Abrégé page 39

SmartLocker AX
EN
10. If necessary, insert additional adapter plates into
the socket.
12
11. If necessary, lever the dead-bolt block out of the
engine block using a slotted screwdriver.
13
12. If necessary, insert another dead-bolt block into the
engine block.
13. Hook the screw into the holder and hold it in place.
14
14. Fix the screw through the dead-bolt side hole on
the back with the plastic mounting tool.
15
15. If necessary, plug in the flange extensions on the
engine block.
16
16. For wooden doors: Insert the fastening pieces into
the recesses provided.
17
17. Hold the plastic mounting tool with one finger and
place the engine block on the adapter plate or
through the D-hole bushing.
18
18. Thread the socket cable through the socket.
19. Place the nut on the screw and carefully tighten the
nut with the assembly tool already inserted until it
sits on the hexagonal mount.
19
3. Initial operation
39 / 124