Carat MIXER 50 SUPER Mode D'emploi page 17

Insert all the different parts in the order shown in
Fig. 2, then lock everything in place using the
22 mm hexagon wrench provided.
2 2
Screw the agitator tightly into the motor casing.
The definitive locking will take place when the
machine is in motion.
3 3
Insert the basket into the lower frame, making sure
to insert one of the four transport handles in the
metal tang provided.
This will prevent the rotation of the basket during
product mixing.
4 4
Insert the agitator by positioning it as shown in
Fig. 5.
5 5
Lower the motor head and tighten lock knob, at this
point, the MIXER is ready for use.
CAUTION !
Please be aware that when the mixing head and
agitator are raised out of the mixing tub an
automatic safety switch is engaged preventing
the operation of the motor.
CAUTION !
THE MOTOR SHOULD ONLY BE RUN IN THE
MIXING POSITION
POSTIONED WITHIN THE MIXING TUB.
CAUTION !
For the opening and closing of the motor head
the agitator must be positioned as shown in
Fig. 5.
The MIXER has been designed to permit the
opening of the motor head only when the
agitator is in this position.
Plastic protection must never be removed from
the machine, because it ensures the accident-
prevention protection measures for the agitator
prescribed by law.
17
GB
WITH THE AGITATOR