Deflation And Storage The Sup - JT2D SUPNNPACK90BL Manuel D'utilisation

C.DEFLATION AND STORAGE THE SUP
DEFLATION
1. Press the valve stem
3. Roll the board starting from the nose
Clean and dry the valve area before opening it.
1. Push the valve stem to release some air from the SUP so you can release the
higher pressure and deflate your board.
2. Remove the fin and the leash.
3. Let the valve open while you are rolling the product towards the valve, starting
folding from the nose of your board.
4. Close the valve.
2. Remove the fin and the leash
26